Functional 3D Printing

Just a simple 2 part print to protect the bag when out and about. Snap fit top

cross-posted from: https://slrpnk.net/post/9706069 > More images, description and print files: https://www.printables.com/de/model/885862-pellet-press-funnel-for-dry-herb-vaporizers

cross-posted from: https://lemm.ee/post/31379850 > STL https://www.printables.com/model/866603-carboy-dryer-stackable > > **Description** > I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too. > > **References:** > 1. This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2 > 2. I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer > 3. This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand > 4. This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy > 5. This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer > > **Licensing:** Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it. Shout out to [!homebrewing@sopuli.xyz](https://sopuli.xyz/c/homebrewing)

One of the best things about 3d printing is fixing problems that you and 2 other people have. This box dries the filament I use and the opening strap snapped off within a week. Someone made a knob. 10 min print. Bam. Works again. https://www.printables.com/model/765759-eibos-easdry-latch-fix-for-when-the-strap-snaps

I wanted a shelf to hold the EIBOS 3D Series X or whatever on top of my SV06 Plus. It's not a great dryer, I don't recommend it, but it's what I have. It works… kinda. PS, you can use this as a base to hold nearly anything up there. Snaps on. Modify as you wish.

cross-posted from: https://lemm.ee/post/27620066 > Stl is https://www.printables.com/model/498730-raspberry-pi-3-model-b-case-with-raspberry-pi-logo/

cross-posted from: https://lemm.ee/post/27376719 > I redesigned a dog poop bag holder and printed it out. The original model was good, but I don't like flat over hangs. https://www.printables.com/model/812982-dog-poop-bag-roll-dispenser #3Dprinting > >

With the talk of Erenst (The solo guy running kbin) missing in action, there's talk of communities migrating over to other instances that are maintained by more than 1 person. mbin is a fork of kbin that is actively being worked on by more than 1 person. Largest instance currently is https://fedia.io/ I've created a backup magazine for functional print there in case this all goes belly up. Feel free to create accounts where you see fit, and sub to that magazine as a backup. Some topics below on the subject, https://kbin.social/m/kbinMeta/t/873938/Is-Ernest-still-here https://kbin.social/m/kbin/t/873855/Unmoderated-and-now-extremely-delayed-federation-is-it-time-to https://kbin.social/m/SquaredCircle/t/873700/MOVING-UPDATE-pt-2-Electric-Boogaloo (Note: Kbin is screwing up so bad, I couldn't even post this from my Kbin account)

With the talk of Erenst (The solo guy running kbin) missing in action, there's talk of communities migrating over to other instances that are maintained by more than 1 person. mbin is a fork of kbin that is actively being worked on by more than 1 person. Largest instance currently is [https://fedia.io/](https://fedia.io/) I've created a backup magazine for functional print there in case this all goes belly up. Feel free to create accounts where you see fit, and sub to that magazine as a backup. Some topics below on the subject, [https://kbin.social/m/kbinMeta/t/873938/Is-Ernest-still-here](https://kbin.social/m/kbinMeta/t/873938/Is-Ernest-still-here) [https://kbin.social/m/kbin/t/873855/Unmoderated-and-now-extremely-delayed-federation-is-it-time-to](https://kbin.social/m/kbin/t/873855/Unmoderated-and-now-extremely-delayed-federation-is-it-time-to) [https://kbin.social/m/SquaredCircle/t/873700/MOVING-UPDATE-pt-2-Electric-Boogaloo](https://kbin.social/m/SquaredCircle/t/873700/MOVING-UPDATE-pt-2-Electric-Boogaloo)

I have previously duplicated the Milwaukee Low-Profile Organizer bins, (as well as designed modified ones) and the regular height organizer bins and posted them on Printables and Thingiverse, and I was asked to design printable bins for the new deep organizer. They don't have bins, so that allowed me the freedom to design them, and not just duplicate the existing ones. It also was a pain in the ass, because I had to buy new measuring tools to measure some of the weird inside angles of the deep pockets. But after a couple of tries (10 iterations for the corner pieces) they are all done.

This is a fully 3D printable clamped under desk drawer. What makes this drawer different? Well, Because it's clamped, you don't need to ruin the bottom of your desk with screw holes!

cross-posted from: https://thelemmy.club/post/9213590 > A tray designed to hold sample containers for supply well/surface water sampling. > > > 

www.nysenate.gov

cross-posted from: https://ttrpg.network/post/4222671 > Want a 3D printer in New York? Get ready for fingerprinting and a 15 day wait > > > Assembly Bill A8132 has been assigned a "Same As" bill in the Senate: S8586 [NYSenate.gov] [A8132 - 2023] > > I don't own a gun, I never have and I don't plan to at any time in the future. But if these pass in the NYS Senate and Congress, it would be required to submit fingerprints for a background check then wait 15 days, before you could own any "COMPUTER OR COMPUTER-DRIVEN MACHINE OR DEVICE CAPABLE OF PRODUCING A > THREE-DIMENSIONAL OBJECT FROM A DIGITAL MODEL." > > This isn't even going to stop any crimes from happening, for pity sakes _regular_ guns end up in criminal charges all the time, regardless of background check laws. How about some _real change_ and _effective measures_, rather then virtue-signaling and theater illusion for a constituency? >

All the sanding blocks I have seen are the nut and bolt type, but i found myself wanting something more of just a ... block. No adjusting, loosening, tightening, moving, just wrap your sandpaper around an edge and go. So I spent 15 minutes in FreeCAD and made one. So far it's working great. In case anyone else wants it, or has feedback. https://www.printables.com/model/762884-simple-sanding-block

Alright this project is growing.. needs a new description. I recommend printing the drawers laying bottom down with tree supports, or on their back. Either way should work, but bottom down will use less support material. To free the pins in the back after printing, place your fingers behind the pin and give it a few sharp taps with something solid, back of a screw driver worked for me. -The chassis print best on their back. You can fit everything onto one 250 cubed build plate as shown. If you are working with a printer with less than a 250 cubed plate, try the Slim Stack or the Split Body, they both will happily print on a machine as small as 200. From left to right in the top of the photo, we have the Big Double (Big Double file and print two Big Double Drawers) Slim Double (Slim Double, print two Slim Double Drawers) Slim Single (Slim Single file and Slim Single Drawer) Big Single (Big Single file and Big Single Drawer) Slim Triple (Slim Triple file, two Slim Double Drawers and one Slim Single Drawer) Not shown is the Split Body, which for now is just the Slim Triple. Also the Slim Stack, which is two Slim Double drawers on top of each other. To assemble the Split, print the Split Chassis L & R, the Split Bottom Drawer L&R the Drawer Tie, and TWO of the Body Ties. I recommend using your favorite relatively thin glue to adhere everything together, then print two Slim Single drawers to fill in the top. I am working on a detailed PDF like my Club and Store models have for this project, to provide more detailed instructions on printing, running through settings and assembly. Its just taking a while, as the project grows so do the instructions. v1.1 01-08-2024; Chassis modified to be printed more reliably v1.15 01-10-2024; Drawer pulls modified to print with less support if in horizontal orientation and no support if in vertical orientation Buy me a coffee :)https://www.buymeacoffee.com/godsci Patreon:(project videos, commercial salable files, upcoming projects, requests)https://www.patreon.com/GodardScientific

I just did a 5 km run at -5°C, and this worked pretty well. Previously with the unmodified neck tube, my glasses fogged up and I couldn't get enough air. https://www.thingiverse.com/thing:6438319

This a remix of trentesous' very good foldable tripod Version 2. I remade the phone mount to rotate, allowing for both landscape and portrait modes. Find the original here: [https://www.thingiverse.com/thing:2862445](https://www.thingiverse.com/thing:2862445) Printing tips: Make sure to enable supports but use support blockers for the threaded bits The orientation of the parts should be as shown in the screenshot above I suggest using Gyroid infill with a high density of \~75 - 50% for the screws and \~25% for the rest

Parts for cable management under a desk. They are screwed to the desk and use tie wraps to fasten the cables. Added 4,5 and 6 Cable holders. Added Samsung Portable T7 SSD Drvive Holder Added regular SSD Drive Holder

I have a few Anker 313 wireless charging stands around the house. They work great with iPhones. Due to the design, they can't charge an AirPods case without an adapter to lift the case to the right spot. That is the purpose of this model. I don't have the old style non-Pro AirPods, but this will probably also work with that wireless charging case. It prints well with 10% infill PLA.

I own a pellet stove that has a heat exchanger with extra long cast iron “fingers” (see photo). This needs to be cleaned regularly. The challenge is, a standard brush attachment's bristles are too short to do this properly. This vacuum attachment solves that problem. It fits a Loveless ash vacuum but should also fit other ash vacuums as the hose size is pretty standard. Print this in PETG for strength. The resulting print is designed to accept a length of bristles cut from a CNC dust shoe brush with 70 - 100mm bristles (choose whatever you need). One of those is enough to make several brushes. I used a small amount of urethane glue to attach the bristles (mist lightly with water first).

USB-Cable-Holder for Ikea Skadis Wall. Standalone with little top Tray or for using as Addon for: [https://www.thingiverse.com/thing:6320736](https://www.thingiverse.com/thing:6320736) [works as addon only with the horizontal one obviously] Technical Data: i've only tested this with a cable length of 1m rolled cable should have a diameter between 50-60mm Print Settings i've used: 0.2mm layer height no supports needed 15% infill PLA see slicer pictures for print orientation

https://www.thingiverse.com/thing:6394749 I used as few non-Ender 3 parts/screws as possible. Reused the X carriage as the Z carriage for the soldering iron. I'm really happy with how it turned out. STP file at the link in case you need to modify it for your particular Ender 3 parts.

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484 Makita DDF484B Makita DHP484 Makita DDF459 Makita DHP481 Makita DTW300 Makita DTW302 Makita DHG180 Makita DHG181 Festool T18+3 Milwaukee 2553 M12 Fuel \*\* Milwaukee 2504 M12 Fuel \*\* DeWalt DCE530 \*\* DeWalt DCD771 \*\* (seems also to fit in 35mm) DeWalt DCF887 \*\* (seems also to fit in 35mm) DeWalt DCF885 \*\* (seems also to fit in 35mm) DeWalt DCD985 \*\* Surebonder Ultra DT-3100FAMZS \*\* Porter Cable PCC601 Porter Cable PCC641 The 35mm version fits good for: Makita DDF487 Makita DHP487 DeWalt DCD778 \*\* The wide version fits: Makita DWT700 \*\* Makita DWT701 \*\* Ryobi PBLIW01 \*\* Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this. Printing Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need \~220g of filament for this. ;) Update 04.05.2023 I've added another design for the holder, based on the idea of @mnemic. I has the same sizes as the other, but saves even more filament. Update 06.10.2023 I've added a wider version of the holder, for Tools like the DWT700 or DWT701. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm. \*\* = Information from users who printed the models.

Whipped up this quick wall mounted spool holder. made to accommodate 1.1kg spools and under at 100% scale and should accommodate 3kgs by just upscaling. feel free to remix and repost all I ask for is oc credit.

Update 2023-11-27: This thing is Version 1 of my adaper. I have now designed Version 2, with the following improvements: the smartphone's center of gravity is now directly above the mounting screw, which gives the tripod a more secure stand, The tripod adapter is now even more compact and lighter. You can download this new version 2 for free here or here. Summary (Version 1) This compact tripod mount can hold almost all smartphones with its clamping range of 64 to 84 mm. It can easily be printed as a single part (“print-in-place”). No other components are required other than a rubber band. For smartphones with slippery sides without a case, self-adhesive silicone bumpers can optionally be glued in. Printing Instructions: Use a 0.4mm line with a layer height of 0.2mm. Print the object in the specified orientation. If possible, place the Z-seam as shown in the image above. There are two print files, with 0.3mm clearance and with 0.25mm clearance ("...tight-fit"). If your printer prints precisely, I would use the latter. Assembly Instructions: Before using the adapter, the assembly of one or two rubber bands is required. Using two rubber bands instead of a single one can increase safety. Smartphones with silicone cases usually hold well. For smartphones with slippery sides without a case, recesses have been provided into which optionally cut self-adhesive silicone bumpers with a thickness of 2 mm and an edge length of 7 mm can be glued (see pictures above). Instructions for Use: Before inserting the smartphone, please check whether the rubber band(s) are still intact. The smartphone could fall out if the rubber band(s) break. The adapter has a printed thread to accept the mounting screw. The screw hole is 11mm deep. If your tripod has a removable lock nut on the mounting screw, you can remove this nut and thus increase the usable thread length of the screw. This increases stability. See picture above. The printed thread can wear out. Check the screw connection for tightness.

This is a fully re-modeled build of a MicroSD case inspired by Kozalakis's one, borrowing some ideas from Kroki's remix of it. I didn't actually use any of their source, rather building from scratch using SD/MicroSD card dimensions. This version relies on fairly close tolerances, so it may be a bit temperamental on some 3D printers (Details below). The main differences from the other two: The case holds 10 MicroSD cards (2 x 5) There are registration tabs in the slots, so the SD adapter lid should only go in with the label side out and the connectors on the inside of the box. The SD adapter should register with the card retention tab on the inside of the slot (The original design used the write-protect tab slot to register the card). Depending on the material used and tolerances, this may be tight or wear out after a while. The SD adapter can be pushed-out from the connector end (the main reason for Kroki's remix). The model is intended to be printed with the notched “connector end” of the case DOWN. The print should not need any supports as all overhangs are either short (i.e. inside the MicroSD slots) or gradually sloping (the inside-top of the box). I added a second version that has added 0.2mm thick “frog toe” sprues on the outer corners of the base. These may assist with bed adhesion and preventing curling during the print. The sprues are more easily removable than a conventional brim addition and use less material too. This was all done using a free OnShape account and the model source is here

This is a strong corner for fixing three planes. Print as in the screenshot. Added a new v2.1 version! The area of contact with the planes has been increased by adding small overhangs that do not affect the print quality. Added a new v2 version! Removed overhangs for simpler print quality. Increased base area for better adhesion.

Similar tools are sold online, pretending to help creating friendship bracelets. I was curious, so I created one for my daughter. Even not really needed it helps to keep the right order of the strings, which helps the younger ones... You should still attach the initial end of the strings somewhere so you can give some tension on the strings... Due to the thread this required 0.2mm when I printed it... Have fun!

CyberLevel. It’s a digital spirit level for camera operators with a circular touchscreen, some Lemo connectors on the other side and a 1/4-20 thread of the back (aluminum gear set insert, much lighter) . Printed on my 6 years old HyperCube Evolution in CF PETG.

It helps categorise, manage, and present content effectively, commonly found in applications. About 130mm in width x 30mm in height. An add-on is an optional component, feature, or extension that can be integrated into an existing system. More designs on Printables: [https://www.printables.com/@ChrisTech](https://www.printables.com/@ChrisTech) Change Log: 7 November 2023 Create an extension part to link with another partition. 15 November 2023 Fine-tuned the design's tolerance.

File [here](https://www.thingiverse.com/thing:6312891). This is almost definitely not the best one that anyone's designed, but at least it's a little unique! The holder parts bend apart to snap brushes in and out, and there's a little shelf above to put your toothpaste on. The shelf has print-in-place hinges so you can print the whole thing flat with no support and it all works with no assembly.

Find out everything you need to know about the battery box on my blog: [https://nerd-corner.com/3d-printed-battery-container-for-cr2032/](https://nerd-corner.com/3d-printed-battery-container-for-cr2032/) or [https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/](https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/)

We put this together for my public library's makerspace. I have a bunch of issues with the design, but it does work so what can I say really. Specifically it's [this one](https://learn.adafruit.com/crickit-lab-shaker/overview). Patrons can use it for whatever they want, i.e. melting dissolvable supports faster, culturing bacteria, etc.

Redesign of a simple micro SD card organizer, based on the original MicroSD Card holder by FritoBandito. Created a new model in Autodesk Fusion 360. Redesigned the slots for easier card removal. Print with 0.2mm layer height